QUICK START GUIDE

1

1

Look for the InteliApp icon on your smartphone and tap to launch the app.

Icon

2

2

The Heater selection screen will open, displaying all available heaters in range.

Select the heater you wish to connect to and tap the ‘connect’ button that appears at the bottom.



2a
2b

Please note that the app must connect to one heater first, to use its settings as a master when sending group commands.

A tip to identify which code relates to your heater is to tap the ‘enter’ button on your heater’s controller.

3

3
3a

The app screen will switch to the InteliApp logo as a connection is established. The ‘Bluetooth Pairing Request’ dialogue box will then display.

3b

To pair, enter the pairing code that appears on the heater’s controller screen and tap ‘pair’.

If the dialogue box does not display then the connection failed. This may mean that it is out of range.

4

Once paired, the app will display the main control screen.

1
The top section displays the temperature set as well as the currently active mode and timed operations if applicable.
1

2
The Heater selection bar is allows the user to scroll between heaters individually using the arrows or define a group by tapping the middle and selecting heaters.
For more heaters to show here, they must already be paired. See instruction 5.
2

3
The dial allows the user to adjust temperature in manual mode. This is locked for pre-defined or timed modes.
3

4
All selectable modes are available with a single tap of the icons at the bottom.
4
4a

5

5a

To re-name a heater, tap its current name. The keyboard will show and the field will be editable. To apply, tap return on the keyboard and then tap the green tick towards the top-right of the screen. This takes the user to the main control screen.

Please note, the heater’s original name will still be shown here to the right of each entry.

5b

To disconnect from a heater and return to the heater selection screen, tap the Bluetooth symbol with the line through it.

To disonnect from a heater or to re-name a heater with a nickname, tap the 3 line menu icon at the top-left of the main control screen.

A slide out menu with two options will display. Tap ‘My Devices’.

Your paired devices will be listed in ‘My Devices’. 5b

5a

5c

6

6

To Edit timings for the User-timer, or the pre-defined timers, tap the arrow on the right of the control dial.

6a

6b

The timer editor will be displayed.

The profile being edited is displayed at the top-left of the screen. To change which is being edited, tap here.

The heater which the profile is stored on is shown at the top-right in orange text. By default, only one day at a time will be selected for editing, this can be changed to multiple days by tapping the calendar symbol situated next to the heater name and then tapping more than one day underneath. Which days are being edited are highlighted in orange.

Please note, timings can be set up and applied for multiple days but not multiple heaters. To set up timings on another heater, the user must first select it via the main control screen or heater selector screen.

To begin editing the 4 timed operations per day, tap any of the 1-4 entries to expand it. The temperature dial will appear with the start and end time wheels underneath.

Simply adjust these values and then tap the up arrow to collapse that operation.

6c

6d

The changes will then be applied to the heater. More changes can be made to the same timer profile in the same way by tapping another entry.

To modify a different timer profile, tape the green slider icon at the top left and select a different profile such as ‘Out All Day’.

To Return to the main control screen, tap the green arrow to the left of the screen.